Type of T-FITTINGS for Insertion Paddle Wheel type Velocity Meter

• Type of Meter : Insertion Paddle Wheel type Velocity Meter
• Max. % of Solids  : 1% of fluid volume, non-abrasive, non-magnetic, <100 micron in dia. & length
• Mounting  : Field or, Panel
• Pipe Line size : min. 15 mm up to 500 mm
• Pressure drop : Less than 0.1 bar
• Pulses  : 4 Pulses each rotation
• Accuracy  : +/- 1% of Full Scale if velocity is more than 0.5 m/s
• Repeatability : +/- 0.5%
• Linearity  : +/- 2% of full scale             
• Enclosure  Weather proof IP 65
• Gland  : PO7
• Fitting material  : ABS, SS304 or, SS316
• Fitting Type : Threaded, Flanged, Weld on Adaptor
• Velocity range : from  0.5 to 5.0 MPS
• Max. Operating Temperature : 60°C for PP Sensor with ABS fittings & 100°C for SS Sensor with SS Fitting
• Sensor Cable Length   0.5 mtrs for Field Mounted Meter & 3 mtrs for Panel Mounted Meter
• Paddle : PVDF (Magnetic up to 100°C & Non Magnetic up to 80°C)
• Indicator Housing  : Polycarbonate
• O-rings/Pin : Viton / Hastealloy C
• Sensor Rod  : PP or, SS316
• Max. Working Pressure : 7 kg/cm2 for PP Sensor with ABS fittings and 12 Kg/cm2 for SS Sensor with SS fitting.
• Display  : 16 X 1 alpha-numeric LCD display with Backlight
• Indicator unit dimensions  : 110 mm (H) X 110 mm (W) X 150 mm (D)
• Field selectable Units: MPS
• Supply : 230 V AC +/- 15%, 50 Hz
• T Fitting  It is compulsory with PP or, SS 316 Flow Sensors (Selection from TYPE OF T-FITTINGS)

Note :To receive quick response, please provide your basic requirement details and max.Application information.